Apex offers a wide range of fencing products, giving our customers a choice of styles, sizes and materials to make their outdoor space unique. Please browse the range of fencing panels shown below for more information.

Larch Lap Panel - NOW TANALISED

Our Larchlap panel features five 16 x 38mm vertical frame pieces to the front and rear of the panel, a 16 x 75mm top rail on the front and a 16 x 75mm bottom rail on the back. The waney edge slats used are 5mm thick. This panel is no longer supplied golden brown and is now Tanalised in green for an even longer service life.

Ranch Panel *

The Ranch panel proves very popular as it is dual faced and the off-set board layout allows the wind to pass through. Constructed using 10 x 165mm boards and five pieces of vertical framework.

Vertical Ranch Panel*

An alternative to the ever popular Ranch panel. This panel is also constructed using 10 x 165mm boards and 19 x 38mm framework.

Now has two extra boards for additional privacy. 

Ranch Trellis Panel

A further alternative to the Ranch panel. This panel is also constructed using 10 x 165mm boards, 19 x 38mm framework and 10 x 38mm trellis slats. 

Double Boarded Panel*

The Double Boarded panel is constructed using 10 x 165mm boards, the frame has a 38 x 75mm top and bottom rail with 38 x 38mm sides and horizontals.

 The 6' x 6' panel now has an additional middle rail.  

Feather Edge Panel*

The Feather Edge panel is constructed using 22 x 125mm Feather Edge boards, the frame has a 38 x 75mm top and bottom rail with 38 x 38mm sides and horizontals.

 The 6' x 6' panel now has an additional middle rail.

Gapped Paling Panel*

The Gapped Paling panel is constructed using 19 x 100mm boards with a 20mm (approx) gap. The frame has a 38 x 75mm top and bottom rail with 38 x 38mm sides and horizontals.

The 6' x 6' panel now has an additional middle rail.

Pointed Paling Panel

The Pointed Paling panel is constructed using 19 x 100mm pointed top boards with a 20mm (approx) gap. The frame has a 38 x 75mm top and bottom rail with 38 x 38mm sides and horizontals.

The 6' x 6' panel now has an additional middle rail.

Double Sided Paling Panel*

The Double Sided Paling panel is a popular dual faced, heavy duty panel. Constructed using 19 x 100mm boards throughout. The frame has a 38 x 75mm top and bottom rail with 38 x 38mm sides and horizontals.

  The 6' x 6' panel now has an additional middle rail.

Chevron Panel*

The Chevron panel is a very robust yet attractive panel. Constructed using 19 x 100mm boards. The frame has a 38 x 75mm top, bottom and vertical center rail with 38 x 38mm sides and intermediates.

 All Chevrons now have two additional 38 x 38mm vertical frame pieces.

Diagonal Panel*

The Diagonal panel is based on the Chevron. Constructed using 19 x 100mm boards. The frame has a top and bottom rail with five vertical frame pieces all 38 x 38mm.

All Diagonals now have an additional 38 x 38mm frame piece.

Pointed Picket Panel

The Pointed Picket is most often used at the front of the property to define the boundary. Constructed using 19 x 75mm boards on two 38 x 75mm rails. The gap between boards is approximately 75mm.

Planed Round Top Picket Panel

The Planed Round Top Picket is most often used at the front of the property to define the boundary. Constructed using 16 x 72mm boards on two 38 x 75mm rails. The gap between boards is approximately 78mm.

Double Sided - Planed Round Top Picket Panel

The Double Sided Planed Round Top Picket is dual faced, most often used at the front of the property to define the boundary. Constructed using 16 x 72mm boards on two 38 x 75mm rails. The gap between boards is approximately 38mm.

4" Square Trellis Panel*

A 4'' Square Trellis panel is a great way to add height to fence or grow climbing plants against. Constructed using 19 x 38mm timber nailed on every cross.

2" Square Trellis Panel*

A 2'' Square Trellis panel is a great way to add height to fence or grow climbing plants against. Constructed using 19 x 38mm timber nailed on every cross.